If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. Otherwise it can be something disastrous. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. Utility companies can then mark out their respective lines when you call them out.
But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.
With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.
It is easier to identify underground utility lines today because they now use different colors for each utility. The colors below indicate the kind of utility uses it.
Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.
Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.
If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. This color is appropriate for electrical works since it is associated with fire and danger.
If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.
Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.
Click here now if you want to learn more about the color coding of utility lines. View here for more.